DZYGA-7

Tactical battlefield UAV FPV quadcopter designed for strike missions with manual guidance

DZYGA-7

Tactical battlefield UAV FPV quadcopter designed for strike missions with manual guidance

System advantages

STABILIZATION MODE
MAINTAINING THE COURSE OF FALLING TO THE TARGET
2-3 MIN PREFLIGHT PREPARATION
FLIES IN SNOW, RAIN, FOG, FROST DOWN TO -25°С
HIGH RESISTANCE AGAINST GUNFIRE DAMAGE
GPS-DENIED MODE

TECHNICAL PARAMETERS

Copter dimensions
360 mm / 360 mm / 80 mm
Payload
Up to 1000 g
Max takeoff weight
In combat gear - 2200 g
Cruising speed
40 km/h
Endurance
10 min
Combat range
8000 m at a flight altitude of 70 m
Control
FPV glasses and/or a LED TV panel
Communication with the operator
Control , frequency 720 - 920 MHz
Analog video, 1.2 GHz
Power of the control transmitter
Up to 2000 mW
Motor type
Electric, pulling
Power supply system
Lithium-polymer battery, 5000 mAh
Expand

Complete set

Find out more about
ordering the UAV
Contact us

Training

GROUND CONTROL STATION

The ground control station includes remote video and control antennas mounted on poles up to 7.2 m in height. The video from the drone is additionally displayed on the LED TV panel.

TRANSPORTATION AND DEPLOYMENT

  • The crew consists of two operators
  • Minimum pre-flight training time – 10 minutes

The elements of the complex are stored in a special backpack and container (antenna), which provide manual transferring, transportation by road, rail or air.

Have questions about UAV?

Contact us
Thank you!
We will contact you shortly

1. Copter DZYGA-7

Copter dimensions - 500 x 500 x 80 mm, weight without power battery and ammunition - 0.5 kg
Packaging dimensions - 550 x 385 x 80 mm, copter weight in packaging - 1.85 kg

2. Battery

6S, 5000 mAh battery for powering the drone

3. FPV – Goggles

For video transmission and OSD display, with the ability to record to a MicroSD memory card

4. FPV drone controller

Controller power supply: 2S battery, 2800 mAh

5. Video and telemetry antennas

Case dimensions 1015 x 390 x 120 mm, weight - 9.5 kg

6. Case “Controler” (backpack)

Backpack dimensions 680 x 330 x 300 mm, weight - 8.7 kg

7. TV set

24'' television with a remote control, adapted video input, and specialized mounting bracket

8. Charger

Charger with cables; multitool; 8 mm open-end wrench; hex key

9. Mast stands (2 pcs)

Dimensions - 500 x 600 x 276 mm, weight - 6 kg

10. Masts (2 pcs)

Height - 2.14-7.2 m, weight - 5.4 kg

1. Copter DZYGA-7

Copter dimensions - 500 x 500 x 80 mm, weight without power battery and ammunition - 0.5 kg
Packaging dimensions - 550 x 385 x 80 mm, copter weight in packaging - 1.85 kg

2. Battery

6S, 5000 mAh battery for powering the drone

3. FPV – Goggles

For video transmission and OSD display, with the ability to record to a MicroSD memory card

4. FPV drone controller

Controller power supply: 2S battery, 2800 mAh

5. Video and telemetry antennas

Case dimensions 1015 x 390 x 120 mm, weight - 9.5 kg

6. Case “Controler” (backpack)

Backpack dimensions 680 x 330 x 300 mm, weight - 8.7 kg

7. TV set

24'' television with a remote control, adapted video input, and specialized mounting bracket

8. Charger

Charger with cables; multitool; 8 mm open-end wrench; hex key

9. Mast stands (2 pcs)

Dimensions - 500 x 600 x 276 mm, weight - 6 kg

10. Masts (2 pcs)

Height - 2.14-7.2 m, weight - 5.4 kg
More info
More info

7. Case K3 “Antennas”

Telemetry antenna, video antenna, video cable.
Case dimensions — 1235х500х170 mm, weight — 14,6 kg

6. TV set, PC

TV: diagonal - 24″, weight - 2.4 kg
PC: Acer Enduro Urban N3
* Tablet is an optional item

5. Mast stands (2 pcs)

Dimensions — 500х600х276 mm, weight — 6 kg

4. UAV Galka case (2 pcs)

Case dimentions — 1695х815х155 mm, weight— 18.6 kg

3. Case «Bungee cord»

Items included: Screwdriver, control canter, carbine, glue 88, spanner, lever, blades, hammer, multitool, knife, voltage converter, propeller, servo, adhesive tape, insulating tape, ties, bungee cord stand.
Case dimensions – 565х595х188 mm, weight — 12.7 kg

2. Case “Batteries”

Items included: Batteries, tester, GPS tracker, antenna, video adapter, charger, power and USB cables, cameras, memory card, laptop, etc.
Case dimensions - 565x595x168 mm, weight - 20.8 kg

11. Cellmeter (battery checker)

8. Telescopic mast (2 pcs)

Dimensions — 500х600х276 mm, weight — 6 kg

1. UAV GALKA (2 pcs)

Case dimentions — 1600х730х120 mm, weight — 2.4 kg
Thank you!
We will contact you shortly